Sun Beam Engirneering Sun Beam Engineering
Home Contact Us
 
About Us
Products
Industries
Clients
After Sales Service
Introduction | Principles of Function | Production Chart | Operation & Maintenance
 PRODUCTION CHART OF PULVERISER FOR DRY MATERIALS AT 60-100 MESH (MIXED) APPROX.
  SIZE OF MACHINE
Output per 8 hour shift 15" 24" 32" 48"
Fire Clay/China Clay, Soap Stone, Bentonite, Yellow Ochre 800 - 1200 kg 4 – 5 M.T. 8 – 10 M.T 15 – 20 M.T.
Bauxite, Lime Stone, Dolomite, Hydrated Lime, Slate, Hard Coaltar Pitch, Coal - 3 – 4 M.T. 6 – 8 M.T. 15 - 18 M.T.
Mica, Graphite
(Feed to be 1" & down size)
- - 2 –2.5 M.T. 5 – 6 M.T.
Coconut Shell, Tamarind Seed - - 800 – 1000 kg 1.5 – 2 M.T.
Red Oxide & Grog - - 3.5 – 4 M.T. 7 – 10 M.T.
Rice Husk Ash - - 3 – 4 M.T. 6 – 8 M.T.
Power Required 12 – 15 H.P. 20 – 25 H.P. 50 – 60 H.P. 100 – 120 H.P.
R.P.M. of Machine 2200 – 2500 1800 – 2200 1600 – 1800 1500 – 1600
Feed Size – Manual Feed 3/4" & down 1" & down 2" & down 3" & down
Feed Size – Auto Feed - - 1/2" & down 3/4" & down
Illustrations are to give a general idea of the machine. All dimensions & specifications are subject to change and alteration. The figures mentioned under production are for guidance only and may vary from case to case depending on many a factor like Hardness, Moisture Content, Feed Size, Operative Fineness, Typical characteristic of the Feed Material, etc. For specific case, our offer document shall be referred.

Production follows the rule "Coarser the Mesh Higher the Output, Finer the Mesh Lesser the Output" and "Softer the Material Higher the Output, Harder the Material Lesser the Output".

Material can ground higher than 150 mesh to 250 mesh also but in that case the production will be lower.